aeroscout-rtls

aeroscout-rtls <IP-address> <Port> [include-unassoc-sta]

no...

Description

This command configures the Aeroscout Real-Time Asset Location Server (RTLS) settings for Instant and sends the Radio-frequency identification (RFID) tag information to an Aeroscout RTLS server.

Syntax

Command/Parameter	Description	Default
<IP-address>	IP address of the Aeroscout RTLS server to which the location reports are sent.	—
<Port>	Port number of the Aeroscout RTLS server to which the location reports are sent..	—
include-unassoc-stas	Includes the client stations not associated to any IAP when mobile unit reports are sent to the Aeroscout RTLS server.	Disabled
no	Removes the Aeroscout RTLS configuration.	—

Usage Guidelines

This command allows you to integrate Aeroscout RTLS server with Instant by specifying the IP address and port number of the Aeroscout RTLS server. When enabled, the RFID tag information for the stations associated with an IAP are sent to the AeroScout RTLS. You can also send the RFID tag information for the stations that are not associated with any IAP.

Example

The following example configures the Aeroscout RTLS server:

(Instant AP)(config)# aeroscout-rtls 192.0.2.2 3030 include-unassoc-sta

(Instant AP)(config)# end

(Instant AP)# commit apply

Command History

Version	Description
Aruba Instant 6.2.1.0-3.3	Command was introduced.

Command Information

IAP Platform	Command Mode
All platforms	Configuration mode