clock summer-time
clock summer-time <timezone> recurring <start-week> <start-day> <start-month> <start-hour> <eweek> <eday> <emonth> <ehour>
no…
Description
This command configures daylight saving for the time zones that support daylight saving time.
Syntax
|
Parameter |
Description |
Range |
| clock summer-time <timezone> |
Configures Daylight Saving time.
|
Timezones that support daylight saving configuration |
| recurring | Indicates the recurrences. | — |
| <start-week> | Indicates the week from which the daylight saving configuration is effective. | — |
| <start-day> | Indicates the day from which the daylight saving configuration applies. | — |
| <start-month> | Indicates the month from which the daylight saving configuration applies. | — |
| <start-hour> | Indicates the hour from which the daylight saving configuration applies. | 1-24 |
| <eweek> | Indicates the week in which the daylight saving configuration ends. | — |
| <eday> | Indicates the day on which daylight saving configuration ends. | — |
| <emonth> | Indicates the month in which daylight saving configuration ends. | — |
| <ehour> | Indicates the hour at which daylight saving configuration ends. | 1-24 |
| no… | Removes the configuration | — |
Usage Guidelines
Use this command to configure daylight saving for the timezones that support daylight saving. When enabled, the daylight saving time ensures that the IAPs reflect the seasonal time changes in the region they serve.
Example
The following example configures daylight saving for a timezone:
(Instant AP)(config)# clock summer-time PST recurring 7 10 March 9PM 38 10 October 9PM
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Configuration mode |