deny-inter-user-bridging

deny-inter-user-bridging

no…

Description

This command disables bridging traffic between two clients of an IAP on the same VLAN. Bridging traffic between the clients will be sent to the upstream device to make the forwarding decision.

Syntax

Parameter	Description
deny-inter-user-bridging	Prevents the inter-user bridging.
no…	Removes the configuration.

Usage Guidelines

Use this command if you have security and traffic management policies defined for upstream devices.

Example

The following command disables inter-user bridging:

(Instant AP)(config)# deny-inter-user-bridging

(Instant AP)(config)# end

(Instant AP)# commit apply

Command History

Version	Description
Aruba Instant 6.2.1.0-3.3	This command is introduced.

Command Information

IAP Platform	Command Mode
All platforms	Configuration mode