You are here: CLI_commands > hotspot anqp-roam-cons-profile
Previous TopicNext Topic

hotspot anqp-roam-cons-profile

hotspot anqp-roam-cons-profile <profile-name>

enable

roam-cons-oi <roam-cons-oi>

roam-cons-oi-len <roam-cons-oi-len>

no…

Description

This command configures the Roaming Consortium Organization Identifier (OI) information to be sent in an Access network Query Protocol (ANQP) information element in a Generic Advertisement Service (GAS) query response.

Syntax

Parameter

Description

Range

hotspot anqp-roam-cons-profile

<profile-name>

Creates roaming consortium profile.

enable Enables the roaming consortium profile.

roam-cons-oi

<roam-cons-oi>

Sends the specified roaming consortium OI in a GAS query response. The OI must be a hexadecimal number 3-5 octets in length.

Hexadecimal number 3-5 octets in length

roam-cons-oi-len

<roam-cons-oi-len>

Indicates the length of the OI. The value of the roam-cons-oi-len parameter must equal upon the number of octets of the roam-cons-oi field.

l 0: 0 Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)

no…

Removes any existing configuration.

Usage Guidelines

Use this command to configure the roaming consortium OIs assigned to service providers when they register with the IEEE registration authority. The Roaming Consortium Information Elements (IEs) contain information about the network and service provider, whose security credentials can be used to authenticate with the IAP transmitting this IE.

Example

The following command defines the roaming consortium OI and OI length in the ANQP roaming consortium profile:

(Instant AP)(config)# hotspot anqp-roam-cons-profile profile1

(Instant AP)(roaming-consortium "profile1")# roam-cons-oi 506F9A

(Instant AP)(roaming-consortium "profile1")# roam-cons-oi-len 3

(Instant AP)(roaming-consortium "profile1")# enable

(Instant AP)(roaming-consortium "profile1")# end

(Instant AP)# commit apply

Command History

Version

Description

Aruba Instant 6.2.1.0-3.3

This command is introduced.

Command Information

IAP Platform

Command Mode

All platforms

Configuration mode and the ANQP roaming consortium profile configuration sub-mode