hotspot h2qp-oper-name-profile
hotspot h2qp-oper-name-profile <profile>
enable
op-fr-name <name>
op-lang-code <language>
no…
Description
This command configures a Hotspot 2.0 Query Protocol (H2QP) operator-friendly name profile.
Syntax
|
Parameter |
Description |
Range | Default |
|---|---|---|---|
| hotspot h2qp-oper-name-profile <profile> | Creates an operator-friendly name profile. | — | — |
|
enable |
Enables the operator-friendly name profile. |
— | — |
|
op-fr-name <name> |
Configures an operator-friendly name to be sent by devices using this profile. If the name includes quotation marks (“), include a backslash character (\) before each quotation mark. (e.g. \"example\") |
1-64 alphanumeric characters | — |
|
op-lang-code <language> |
Configures an ISO 639 language code that identifies the language used in the op-fr-name command. |
— | — |
|
no… |
Removes any existing configuration. |
— | — |
Usage Guidelines
Use this command to configure an operator-friendly name that can identify the operator and also provides information about the location.
Example
The following example configures an operator friendly profile:
(Instant AP)(config)# hotspot h2qp-oper-name-profile Profile1
(Instant AP)(operator-friendly-name "Profile1")# op-fr-name hotspot1
(Instant AP)(operator-friendly-name "Profile1")# op-lang-code EN
(Instant AP)(operator-friendly-name "Profile1")# enable
(Instant AP)(operator-friendly-name "Profile1")# end
(Instant AP)# commit apply
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Configuration mode and the H2QP operator friendly name profile configuration sub-mode |