rf-band

rf-band {2.4| 5.0| all}

Description

This command configures the radio frequency band for an IAP.

Syntax

Parameter	Description	Range	Default
rf-band {2.4| 5.0| all}	Configures a radio frequency band for an IAP. You can configure any of the following options: l 2.4 — For 2.4 GHz band or 802.11g configuration l 5 — For 5 GHz and 802.11a configuration l all - For a mixed configuration of 2.4.GHz and 5 GHz. If you do not specify any value, by default both 5 GHz and 2.4 GHz bands are selected.	2.4, 5.0, all	all

Usage Guidelines

Use this command to configure RF band for an IAP.

Example

The following example configures the 5 GHz RF band for an IAP.

(Instant AP)(config)# rf-band 5.0

Command History

Version	Description
Aruba Instant 6.2.1.0-3.3	This command is introduced.

Command Information

IAP Platform	Command Mode
All platforms	Configuration mode