show alert global

show alert global [count]

Description

This command displays the list of client alerts for an IAP.

Syntax

Parameter	Description
<count>	Filters client alerts based on the specified number.

Usage Guidelines

Use this command to view the client alerts for an IAP. The client alerts occur when clients are connected to the Instant network. Alerts are generated when a client encounters problems while accessing or connecting to the IAP network.

Example

The show alerts global command displays information about the clients for which alerts (if any) are generated. The following example shows the output for the show alerts global command when no client alerts are generated.

Client Alerts

-------------

Timestamp Type MAC Address Description Access Point

--------- ---- ----------- ----------- ------------

The output of this command provides the following information:

Parameter	Description
Timestamp	Displays the time at which the client alert was recorded.
MAC Address	Displays the MAC address of the client that caused the alert.
Description	Provides a short description of the alert.
Access Point	Displays the IP address of the IAP to which the client is connected.

Command History

Version	Description
Aruba Instant 6.2.1.0-3.3	This command is introduced.

Command Information

IAP Platform	Command Mode
All platforms	Privileged EXEC mode