show allowed-aps
show allowed-aps
Description
This command displays the list of IAPs that are allowed to join the IAP cluster.
Usage Guidelines
Use this command to view the IAP whitelist.
Example
The following example shows the output of the command:
Allow New APs :enable
AP Whitelist
------------
MAC Address
-----------
d8:c7:c8:cb:d4:20
d8:c7:c8:cb:d3:98
d8:c7:c8:cb:d3:b4
d8:c7:c8:cb:d3:d4
The output of this command provides the following information:
|
Parameter |
Description |
| Allow New APs |
Indicates if the new IAPs are allowed to join the network. |
| MAC Address | Displays the MAC address of the IAPs that are allowed to join the network. |
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |