show ap allowed-channels
show ap allowed-channels <country-code>
Description
This command displays a list of allowed channels for a
Syntax
|
Parameter |
Description |
| <country-code> | Specify a country code to display allowed channels for that country. |
Usage Guidelines
Specify the country code for your IAP during the initial setup. Changing the country code causes the valid channel lists to be reset to the defaults for that country.
Example
The following example shows the output of the command:
Allowed Channels for Country Code "US"
--------------------------------------
PHY Type Allowed Channels
-------- ----------------
802.11g (indoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (indoor) 36 40 44 48 149 153 157 161 165
802.11g (outdoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (outdoor) 149 153 157 161 165
802.11g 40MHz (indoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (indoor) 36-40 44-48 149-153 157-161
802.11g 40MHz (outdoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (outdoor) 149-153 157-161
The output of this command includes the following information:
|
Parameter |
Description |
||||||
| PHY Type |
Indicates the PHY types for the following bands: types:
|
||||||
| Allowed Channels | Displays the list of allowed channels for a specific regulatory domain. |
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |