You are here: CLI_commands > show ap debug dhcp-packets
Previous TopicNext Topic

show ap debug dhcp-packets

show ap debug dhcp-packets


This command displays information about the DHCP packets sent or received by an IAP.

Usage Guidelines

Use this command to view information about the DHCP packets trace information for an IAP.


The following example shows the output of show ap debug dhcp-packets command:

Traced Dhcp Packets


Timestamp Mtype Htype Hops TID Cip Yip Sip Gip Cmac

--------- ----- ----- ---- --- --- --- --- --- ----

The output of this command includes the following parameters:



Timestamp Displays the timestamp for DHCP packets.
Mtype Indicates the message type.
Htype Indicates the hardware address type
Hops Shows the number of hops.
TID Shows the transaction ID.
Cip Indicates the client IP address.
Yip Indicates the IP address of the IAP.
Sip Indicates the source IP address from which the DHCP packets originated.
Gip Indicates the Gateway IP address.
Cmac Indicates the MAC address of the client.

Command History



Aruba Instant

This command is introduced.

Command Information

IAP Platform

Command Mode

All platforms

Privileged EXEC mode