show ap mesh counters
show ap mesh counter
Description
This command displays the mesh counters for a
Usage Guidelines
Use this command to view a list of mesh counters available for a
Example
The following example shows the output of command.
Mesh Packet Counters
--------------------
Interface Echo Sent Echo Recv Probe Req Probe Resp Assoc Req Assoc Resp Assoc Fail Link up/down Resel. Switch Other Mgmt
--------- --------- --------- --------- ---------- --------- ---------- ---------- ------------ ------ ------ ----------
Parent 0 0 770 770(770 HT) 0 0 0 0 - - 0
Received Packet Statistics: Total 7013859, Mgmt 7013859 (dropped non-mesh 0), Da ta 0 (dropped unassociated 0)HT: pns=770 ans=0 pnr=0 ars=0 arr=0 anr=0
Recovery Profile Usage Counters
-------------------------------
Item Value
---- -----
Enter recovery mode 0
Exit recovery mode 0
Total connections to switch 0
Mesh loop-prevention Sequence No.:370765
Mesh timer ticks:370764
d8:c7:c8:c4:42:98# show ap mesh counters
Mesh Packet Counters
--------------------
Interface Echo Sent Echo Recv Probe Req Probe Resp Assoc Req Assoc Resp Assoc Fail Link up/down Resel. Switch Other Mgmt
--------- --------- --------- --------- ---------- --------- ---------- ---------- ------------ ------ ------ ----------
Parent 0 0 770 770(770 HT) 0 0 0 0 - - 0
Received Packet Statistics: Total 7016747, Mgmt 7016747 (dropped non-mesh 0), Data 0 (dropped unassociated 0)HT: pns=770 ans=0 pnr=0 ars=0 arr=0 anr=0
Recovery Profile Usage Counters
-------------------------------
Item Value
---- -----
Enter recovery mode 0
Exit recovery mode 0
Total connections to switch 0
Mesh loop-prevention Sequence No.:370891
Mesh timer ticks:370890
|
Column |
Description |
| Interface | Indicates whether the mesh interface connects to a Parent AP or a Child AP. Each row of data in the Mesh Packet Counters table shows counter values for an individual interface. |
| Echo Sent | Number of echo packets sent. |
| Echo Recv | Number of echo packets received. |
| Probe Req | Number of probe request packets sent from the interface specified in the Mesh-IF parameter. |
| Probe Resp | Number of probe response packets sent to the interface specified in the Interface parameter. |
| Assoc Req | Number of association request packets from the interface specified in the Interface parameter. |
| Assoc Resp | Number of association response packets from the interface specified in the Interface parameter. This number includes valid responses and fail responses. |
| Assoc Fail | Number of fail responses received from the interface specified in the Interface parameter. |
| Link up/down | Number of times the link up or link down state has changed. |
| Resel. | Number of times a mesh point attempted to reselect a different mesh portal. |
| Switch | Number of times a mesh point successfully switched to a different mesh portal. |
| Other Mgmt | Management frames of any type other than association and probe frames, either received on child interface, or sent on parent interface. |
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |