show blacklist-client [config]
This command shows the configuration details for blacklisting clients and lists the clients blacklisted by
Parameter |
Description |
config | Displays the parameters and values configured for manual or dynamic blacklisting of clients. |
Use this command to view information about the clients blacklisted by a
The following output is displayed for the
command:Blacklisted Clients
-------------------
MAC Reason Timestamp Remaining time(sec) AP name
--- ------ --------- ------------------- -------
00:24:6c:ca:41:51 user-defined 14:46:18 Permanent -
The output of this command provides information on the MAC address of client that is blacklisted, the reason for blacklisting, timestamp, the associated IAP name, and the duration until which the client is blacklisted.
The following output is displayed for the
command:Blacklist Time :3600
Auth Failure Blacklist Time :3600
Manually Blacklisted Clients
----------------------------
MAC Time
--- ----
00:24:6c:ca:41:51 14:46:18
Dynamically Blacklisted Clients
-------------------------------
MAC Reason Timestamp Remaining time(sec) AP name
--- ------ --------- ------------------- -------
Dyn Blacklist Count :0
The output of this command provides the following information:
Parameter |
Description |
Blacklist Time | Indicates the duration in seconds since the blacklisting has been triggered due to an ACL rule. |
auth-survivability cache-time-out | Indicates the duration in seconds after which the clients that exceed the maximum authentication failure threshold are blacklisted. |
Manually Blacklisted clients | Displays the details of clients that are blacklisted manually. |
Dynamically Blacklisted Clients |
Displays the list of clients that dynamically blacklisted due to multiple authentication rules or an ACL rule trigger. |
Version |
Description |
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
IAP Platform |
Command Mode |
All platforms |
Privileged EXEC mode |