You are here: CLI_commands > show delta-config
Previous TopicNext Topic

show delta-config

show delta-config cfgid


This command displays the difference between the current configuration in the current CLI session and the configuration that is saved on the IAP.

Usage Guidelines

Use this command to view the difference between the current configuration information stored in the IAP flash memory and the configuration information saved in the IAP memory.


The following example shows the output of the show delta-config command:

103-Master# show delta-config

IAP delta configuration current_config_id:7

IAP delta configuration top_config_id:7

Command History



Aruba Instant

This command is introduced.

Command Information

IAP Platform

Command Mode

All platforms

Privileged EXEC mode