show fault
show fault [history]
Description
This command displays the list of active faults that occur in the event of a system fault and the faults that were cleared from the system.
Syntax
|
Parameter |
Description |
|
history |
Displays the list of faults that were cleared. |
Usage Guidelines
Use this command to view the active faults for a
Example
The following example shows the output for the command:
Active Faults
-------------
Time Number Description
---- ------ -----------
Total number of entries in the queue :0
The following example shows the output for the command:
Cleared Faults
--------------
Time Number Cleared By Description
---- ------ ---------- -----------
Total number of entries in the queue :0
The output of these commands provide the following information:
|
Parameter |
Description |
| Timestamp |
Displays the system time at which an event occurs. |
| Number |
Indicates the sequence |
| Cleared By | Displays the module which cleared this fault. |
| Description | Provides a short description of the event details. |
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |