You are here: CLI_commands > show network-summary
Previous TopicNext Topic

show network-summary

show network-summary


This command displays the status of the available network configurations on the IAP.

Usage Guidelines

Use this command to view the status of the network configurations.


The following output is displayed for the show network-summary command:

Internet reachable :Detection disabled

Active uplink :eth0

Primary VPN :Not configured

Secondary VPN :Not configured

AirWave :Not configured

The output of this command provides the following information:



Internet Reachable Indicates the status of the WLAN network.
Active uplink Indicates the uplink that is currently active on the IAP.
Primary VPN Indicates the status of the Primary VPN configuration.
Secondary VPN Indicates the status of the Secondary VPN connection.
Airwave Indicates the status of the AirWave configuration.

Command History



Aruba Instant This command is introduced.

Command Information

IAP Platform

Command Mode

All platforms

Privileged EXEC mode