show spectrum-alert

show spectrum-alert

Description

This command displays the list of spectrum alerts for an IAP.

Syntax

Parameter	Description
<count>	Filters the alerts based on the specified number.

Usage Guidelines

Use this command to view the spectrum alerts for an IAP. When a new non Wi-Fi device is found, an alert is reported to the Virtual Controller. The spectrum alert messages provide information about the device ID, device type, IP address of the spectrum monitor or hybrid AP, and the timestamp. The Virtual Controller reports the detailed device information to AirWave Management server.

Example

The following example shows the output for the show spectrum-alert command when no alerts are generated.

Spectrum Alerts

---------------

Timestamp Type ID Access Point

--------- ---- -- ------------

The output of this command provides the following information:

Parameter	Description
Timestamp	Displays the time at which alert was recorded.
Type	Displays the type of the device that generated the alert.
ID	Displays the device ID for which the alert is generated.
Access Point	Displays the IP address of the IAP.

Command History

Version	Description
Aruba Instant 6.2.1.0-3.3	This command is introduced.

Command Information

IAP Platform	Command Mode
All platforms	Privileged EXEC mode