You are here: CLI_commands > show wifi-uplink

show wifi-uplink

show wifi-uplink {auth log |config | status}

Description

This command displays the configuration details, the status, and authentication log for the Wi-Fi uplinks configured on an IAP.

Parameter	Description
auth log	Displays the authentication configuration details and an authentication log.
config	Displays the Wi-Fi configuration parameters enabled on an IAP.
status	Displays the status of the Wi-Fi uplink.

Use this command to view the information about status and configuration details for the Wi-Fi uplink enabled on an IAP.

The following output is displayed for the show wifi-uplink auth log command:

----------------------------------------------------------------------

wifi uplink auth configuration:

----------------------------------------------------------------------

wifi uplink auth log:

----------------------------------------------------------------------

[1536]2013-05-08 23:42:06.647: Global control interface '/tmp/supp_gbl'

The following output is displayed for the show wifi-uplink config command:

ESSID :Wifi

Cipher Suite :wpa-tkip-psk

Passphrase :test1234

Band :dot11a

The output for this command displays the following information:

Parameter	Description
ESSID	Displays the name of the network for which the Wi-Fi uplink is configured.
Cipher Suite	Displays the encryption settings configured for the Wi-Fi uplink. For example, wpa-tkip-psk or wpa2-ccmp-psk.
Passphrase	Displays the WPA passphrase configured for the Wi-Fi uplink.
uplink-band <band>	Displays the band configured for the Wi-Fi uplink connection. For example, dot11a and dot11g.

The following output is displayed for the show wifi-uplink status command:

configured :YES

enabled :YES

The output of this command indicates if the Wi-Fi uplink is configured and enabled on the IAP.

Version	Description
Aruba Instant 6.2.1.0-3.3	This command is introduced.

IAP Platform	Command Mode
All platforms	Privileged EXEC mode