show ap debug dot1x-statistics
show ap debug dot1x-statistics
Description
This command displays the aggregate 802.11X debug statistics for a
Usage Guidelines
Use this command to view information about the 802.11x authentication.
Example
The following output is displayed for the command:
802.1X Statistics
-----------------
Mac Name AP Auth-Succs Auth-Fails Auth-Tmout Re-Auths
---------- ------ ---- ---------- -------- --------- ------- -------
08:ed:b9:e1:51:7d d8:c7:c8:3d:42:12 0 0 0 0
Total: 0 0 0 0
Supp-Naks UKeyRot MKeyRot ---------- -------- --------
0 0 0
0 0 0
802.1x Counters
WPA2
Message-1......................3
Message-2......................2
Message-3......................2
Message-4......................2
The output of this command includes the following parameters:
|
Parameter |
Description |
| Mac | Displays the MAC address of the authenticated client. |
|
Name
|
Displays the name of the client device |
| AP | Displays the AP device details to which the client is connected. |
| Auth-Succs | Displays the number of times the client authenticated successfully. |
| Auth-Fails | Displays the number of times the client failed to authenticate. |
| Auth-Timeout | Displays if client authentication timeout details. |
| Reauths | Displays the reauthentication attempts if any. |
| Supp-Naks | Displays the number of supplementary NAKs. |
| UkeyRot | Displays the unicast key rotation details. |
| MkeyRot | Displays the multicast key rotation details. |
| 802.1X counters | Displays the 802.1X authentication counters. |
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |