show arm config
show arm config
Description
This command displays the ARM configuration details for a
Usage Guidelines
Use this command to view the ARM configuration details for a
Example
The following example shows the output of command:
Minimum Transmit Power :18
Maximum Transmit Power :127
Band Steering Mode :prefer-5ghz
Client Aware :enable
Scanning :enable
Wide Channel Bands :5ghz
Air Time Fairness Mode :fair-access
Spectrum Load Balancing :disable
SLB NB Matching Percent :75
SLB Calculating Interval :30
SLB Threshold :2
Custom Channels :No
2.4 GHz Channels
----------------
Channel Status
------- ------
1 enable
2 disable
3 disable
4 disable
5 disable
6 enable
7 disable
8 disable
9 disable
10 disable
11 enable
12 disable
13 disable
1+ enable
2+ disable
3+ disable
4+ disable
5+ disable
6+ disable
7+ enable
5.0 GHz Channels
----------------
Channel Status
------- ------
36 enable
40 enable
44 enable
48 enable
52 enable
56 enable
60 enable
64 enable
149 enable
153 enable
157 enable
161 enable
165 enable
36+ enable
44+ enable
52+ disable
60+ disable
149+ enable
157+ enable
The output of this command provides the following information:
|
Parameter |
Description |
| Minimum Transmit Power | Displays the minimum transmission power configured for the ARM channels. |
| Maximum Transmit Power | Displays the maximum transmission power configured for the ARM channels. |
| Band Steering Mode | Displays the band steering mode configuration parameters |
| client aware | Indicates the activation status of the Client aware feature. |
| Scanning | Indicates if scanning for available channels is enabled. |
| Wide Channel Bands | Indicates if 40MHz channel are enabled on 2.4 GHz or 5 GHz band. |
| Air Time Fairness Mode | Displays configuration details for the Airtime Fairness Mode feature. |
| Spectrum Load Balancing | Indicates if the Spectrum load balancing feature is enabled or disabled. |
| SLB NB Matching Percent | Indicates the percentage for comparing client density of AP neighbors for spectrum load balancing. |
| SLB Calculating Interval | Indicates the frequency at which the client density on IAP is calculated for spectrum load balancing. |
|
Custom Channels |
Displays custom channels if any. |
| Channel | Displays the list of channels available in the 2.4 GHz and 5 GHz bands. |
| Status |
Indicates if the channels in the 2.4 GHz and 5 GHz bands are enabled or disabled. |
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |