You are here: CLI_commands > show l2tpv3 session
Previous TopicNext Topic

show l2tpv3 session

show l2tpv3 session status


This command displays the L2TP session connectivity status.

Usage Guidelines

Use this command to view the session connectivity status.


The following example shows the output of the show l2tpv3 session status command:

Session 1821009927 on tunnel 858508253:-

type: LAC Incoming Call, state: ESTABLISHED

created at: Jul 2 04:58:45 2013

administrative name: 'test_session' (primary)

created by admin: YES, peer session id: 12382

session profile name: test_session_primary

data sequencing required: OFF

use data sequence numbers: OFF

Peer configuration data:-

data sequencing required: OFF

framing types:

data rx packets: 16, rx bytes: 1560, rx errors: 0 rx cookie error 0

data tx packets: 6, tx bytes: 588, tx errors: 0

The output of this command shows the session connectivity status, tunnel creation time. configuration data, data frame types and so on.

Command History



Aruba Instant

This command is introduced.

Command Information

IAP Platform

Command Mode

All platforms

Privileged EXEC mode