show l2tpv3 system

show l2tpv3 system statistics

Description

This command displays the L2TPV3 system statistics details.

Usage Guidelines

Use this command to view the tunnel and session statistics.

Example

The following example shows the output of the show l2tpv3 system statistics command:

(Instant AP)# sh l2tpv3 system statistics

L2TP counters:-

Total messages sent: 99, received: 194, retransmitted: 0

illegal: 0, unsupported: 0, ignored AVPs: 0, vendor AVPs: 0

Setup failures: tunnels: 0, sessions: 0

Resource failures: control frames: 0, peers: 0

tunnels: 0, sessions: 0

Limit exceeded errors: tunnels: 0, sessions: 0

Frame errors: short frames: 0, wrong version frames: 0

unexpected data frames: 0, bad frames: 0

Internal: authentication failures: 0, message encode failures: 0

no matching tunnel discards: 0, mismatched tunnel ids: 0

no matching session_discards: 0, mismatched session ids: 0

total control frame send failures: 0, event queue fulls: 0

Message counters:-

Message RX Good RX Bad TX

ILLEGAL 0 0 0

SCCRQ 0 0 1

SCCRP 1 0 0

SCCCN 0 0 1

STOPCCN 0 0 0

RESERVED1 0 0 0

HELLO 95 0 95

OCRQ 0 0 0

OCRP 0 0 0

OCCN 0 0 0

ICRQ 0 0 1

ICRP 1 0 0

ICCN 0 0 1

RESERVED2 0 0 0

CDN 0 0 0

WEN 0 0 0

SLI 0 0 0

The output of this command shows the system statistics such as total number of messages sent or received, type of message, and so on.

Command History

Version	Description
Aruba Instant 6.2.1.0-3.4	This command is introduced.

Command Information

IAP Platform	Command Mode
All platforms	Privileged EXEC mode