show log l3-mobility
show log l3-mobility [<count>]
Description
This command displays the logs for Layer-3 mobility domains configured on a
Syntax
|
Parameter |
Description |
|
<count> |
Filters the log output based on the number specified. |
Usage Guidelines
Use this command to view the L3-mobility logs for a
Example
The following output is displayed for the command:
May 9 21:23:07: Potential Foreign Client Information: mac c4:85:08:de:06:d4 rcvd from self vlan 0, 1 tid 255 oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info l2-timed-out,test
May 9 01:43:22: Station Offline: mac 08:ed:b9:e1:51:87 rcvd from self vlan 0, 0 tid 255 oldapip 0.0.0.0 fapip 0.0.0.0 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:53: This Client is Normal: mac 08:ed:b9:e1:51:87 sent to self vlan 0, 1 tid 255 oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:53: Too many retries: mac 08:ed:b9:e1:51:87 rcvd from self vlan 0, 1 tid 255 oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:52: Potential Foreign Client Information: mac 08:ed:b9:e1:51:87 rcvd from self vlan 0, 1 tid 255 oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info l2-timed-out,test
The output of this command provides the following information:
|
Content |
Description |
| Timestamp | Indicates the timestamp of the L3 mobility event. |
| Client MAC | Indicates the MAC address of the roaming clients. |
| Event | Provides a description of the mobility event. |
| Home Vlan | Displays the VLAN ID associated with the home subnet. |
| VAP Vlan | Displays the VLAN ID associated with the Virtual AP. |
| tid | Indicates the tunnel interface used for routing packets. |
| Old AP IP | Indicates the IP address of the IAP from which the client has roamed. |
| FAP IP | Indicates the IP address of the IAP in the foreign subnet. |
| HAP IP | Indicates the IP address of the IAP in the home subnet, to which the client is currently connected. |
| VC IP | Indicates the IP address of the Virtual Controller. |
| Additional Info | Displays additional information if any. |
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |