show radio config
show radio config
Description
This command displays the 2.4 GHz and 5 GHz radio configuration details for a
Usage Guidelines
Use this command to view the 2.4 GHz and 5 GHz radio configuration details for a
Example
The following example shows the output of command:
(Instant AP)# show radio config
Legacy Mode:enable
Beacon Interval:100
802.11d/802.11h:enable
Interference Immunity Level:2
Channel Switch Announcement Count:0
MAX Distance:600
Channel Reuse Type:disable
Channel Reuse Threshold:0
Background Spectrum Monitor:disable
5.0 GHz:
Legacy Mode:enable
Beacon Interval:100
802.11d/802.11h:enable
Interference Immunity Level:2
Channel Switch Announcement Count:2
MAX Distance:600
Channel Reuse Type:disable
Channel Reuse Threshold:0
Background Spectrum Monitor:disable
Standalone Spectrum Band:5ghz-upper
The output of this command provides the following information:
|
Parameter |
Description |
| Legacy Mode |
Indicates if the legacy mode is enabled on the IAPs to run the radio in the non-802.11n mode. |
|
Beacon Interval |
Displays beacon interval for the IAP in milliseconds. When beacon interval is configured, the 802.11 beacon management frames are transmitted by the access point at the specified interval. |
| 802.11d/802.11h | Displays if the IAP is allowed advertise its 802.11d (country information) and 802.11h (transmit power control) capabilities. |
| Interference Immunity Level |
Displays the immunity level configured for an AP radio profile to improve performance in high-interference environments. For more information on configuring immunity levels, see rf dot11a-radio-profile and rf dot11g-radio-profile. |
|
Channel Switch Announcement Count |
Displays the number of channel switching announcements that are sent before switching to a new channel. |
| MAX distance | Indicates the maximum distance in meters between a client and an AP or between a mesh point and a mesh portal. |
|
Channel Reuse Type |
Indicates if channel reuse type is enabled. |
| Channel Reuse Threshold | Displays the channel reuse threshold configured for channel reuse type. |
|
Background Spectrum Monitor |
Indicates background spectrum monitoring is enabled. When enabled, the IAPs in access mode continue with normal access service to clients, while performing additional function of monitoring RF interference (from both neighboring APs and non Wi-Fi sources such as, microwaves and cordless phones) on the channel they are currently serving clients. |
| Standalone Spectrum |
Indicates the portion of the channel (upper, middle, or lower) that is being monitored on the 5 GHz band. |
Command History
|
Version |
Description |
| Aruba Instant 6.2.1.0-3.4 | This command is modified. |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |