show uplink
show uplink {config|stats}
Description
This command displays uplink configuration details and status of for a
Syntax
|
Parameter |
Description |
| show uplink config | Displays the uplink interface configuration details for a |
| show uplink stats | Displays the aggregate uplink statistics for a |
Usage Guidelines
Use this command to view the information about uplink status and configuration for a
Example
The following output is displayed for the command:
Uplink preemption :enable
Uplink enforce :none
Ethernet uplink eth0 :DHCP
Internet failover :disable
Max allowed test packet loss:10
Secs between test packets :30
VPN failover timeout (secs) :180
The output of this command provides the following information:
|
Column |
Description |
| Uplink preemption | Indicates if the uplink preemption is enabled. |
| Uplink enforce | Indicates if any uplinks are enforced. |
| Ethernet uplink eth0 | Indicates if Ethernet uplink is configured. |
| Max allowed test packet loss |
Indicates an allowed number of test packets that can be lost verifying the Internet availability. |
| Secs between test packets | Indicates the frequency at which the test packets are sent to verify the Internet availability. |
| VPN failover timeout (secs) | Indicates the number of seconds to wait, before trying a different uplink when a VPN tunnel is down. |
The following output is displayed for the command:
Uplink preemption :enable
Uplink enforce :none
Ethernet uplink eth0 :DHCP
Uplink Table
------------
Type State Priority In Use
---- ----- -------- ------
eth0 UP 0 Yes
Wifi-sta INIT 6 No
3G/4G INIT 7 No
Internet failover :disable
Max allowed test packet loss:10
Secs between test packets :30
VPN failover timeout (secs) :180
ICMP pkt sent :0
ICMP pkt lost :0
Continuous pkt lost :0
VPN down time :0
The output of this command provides the following information:
|
Column |
Description |
| Uplink preemption | Indicates if the uplink preemption is enabled. |
| Uplink enforce | Indicates if any uplinks are enforced. |
| Ethernet uplink eth0 | Indicates if Ethernet uplink is configured. |
| Type | Indicates the type of the uplink. |
| State | Indicates the uplink status. |
| Priority | Indicates if any priority levels are assigned to the uplink. |
| In Use | Indicates if the uplink is in use. |
| Max allowed test packet loss |
Indicates an allowed number of test packets that can be lost verifying the Internet availability. |
| Secs between test packets | Indicates the frequency at which the test packets are sent to verify the Internet availability. |
| VPN failover timeout (secs) | Indicates the number of seconds to wait, before trying a different uplink when a VPN tunnel is down. |
|
ICMP pkt sent |
Indicates the number of ICMP packets sent to verify the Internet availability for uplink switchover. |
| ICMP pkt lost | Indicates the number of ICMP packets lost. |
| Continuous pkt lost | Indicates if the packets are lost continuously. |
|
VPN down time |
Indicates the time since the VPN connection is unavailable. |
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |