show vpn
show vpn {config|status|tunnels}
Description
This command displays the status and configuration details for VPN-enabled IAPs.
Syntax
|
Parameter |
Description |
|
config |
Displays configuration details for the VPN-enabled IAPs. |
| status | Displays the status of the VPN connections enabled on a |
| tunnels | Displays the IAP-VPN retry counter statistics. |
Example
The following example shows the output displayed for show vpn config command:
Concentrator
------------
Type Value
---- -----
VPN Primary Server
VPN Backup Server
VPN Preemption disable
VPN Fast Failover disable
VPN Hold Time 600
VPN Monitor Pkt Send Freq 5
VPN Monitor Pkt Lost Cnt 2
VPN Ikepsk
VPN Username
VPN Password 95a5624fbf08dfb3e794ac2c6686e330
GRE outside vpn disable
GRE Server
GRE IP Address 0.0.0.0
GRE Type 1
GRE Per AP Tunnel disable
Reconnect User On Failover disable
Reconnect Time On Failover 60
Routing Table
-------------
Destination Netmask Gateway Type
----------- ------- ------- ----
The output displayed for this command provides information on the parameters configured for the VPN concentrator.
For more information on the VPN configuration parameters, see the following commands:
| | vpn primary |
| | vpn backup |
| | vpn preemption |
| | vpn fast-failover |
| | vpn gre-outside |
| | vpn hold-time |
| | vpn monitor-pkt-lost-cnt |
| | vpn monitor-pkt-send-freq |
| | vpn ikepsk |
| | gre type |
| | gre primary |
| | gre per-ap-tunnel |
The following example shows the output displayed for show vpn status command:
profile name:default
--------------------------------------------------
current using tunnel :unselected tunnel
ipsec is preempt status :disable
ipsec is fast failover status :disable
ipsec hold on period :600
ipsec tunnel monitor frequency (seconds/packet) :5
ipsec tunnel monitor timeout by lost packet cnt :2
ipsec primary tunnel crypto type :Cert
ipsec primary tunnel peer address :N/A
ipsec primary tunnel peer tunnel ip :N/A
ipsec primary tunnel ap tunnel ip :N/A
ipsec primary tunnel current sm status :Init
ipsec primary tunnel tunnel status :Down
ipsec primary tunnel tunnel retry times :0
ipsec primary tunnel tunnel uptime :0
ipsec backup tunnel crypto type :Cert
ipsec backup tunnel peer address :N/A
ipsec backup tunnel peer tunnel ip :N/A
ipsec backup tunnel ap tunnel ip :N/A
ipsec backup tunnel current sm status :Init
ipsec backup tunnel tunnel status :Down
ipsec backup tunnel tunnel retry times :0
ipsec backup tunnel tunnel uptime :0
The command displays the current status of VPN connection, IP address configured for VPN/IPSec connections, and the tunnel details.
Command History
|
Version |
Description |
| Aruba Instant 6.4.0.2-4.1 | The keyword was added. |
|
Aruba Instant 6.3.1.1-4.0 |
The command output is modified. |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Privileged EXEC mode |