virtual-controller-vlan
virtual-controller-vlan <virtual-controller-vlan> <virtual-controller-mask> <virtual-controller-gateway>
no…
Description
This command configures a VLAN for the Virtual Controller.
Syntax
|
Parameter |
Description |
| virtual-controller-vlan <virtual-controller-vlan> |
Associates a VLAN ID with the Virtual Controller. |
| <virtual-controller-mask> | Configures a subnet mask for the Virtual Controller. |
| <virtual-controller-gateway> | Configures a gateway for the Virtual Controller. |
| no… | Removes the configuration. |
Usage Guidelines
Use this command to configure VLAN, Netmask, and Gateway for the Virtual Controller.
Example
The following example configures VLAN for the Virtual Controller:
(Instant AP)(config)# virtual-controller-vlan <Vlan-ID> <Mask> <Gateway-IP-address>
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Configuration mode |