vpn hold-time
vpn hold-time <seconds>
no...
Description
This command configures the time interval after which the IAP can switch over to the primary host when preemption is enabled.
Syntax
|
Parameter |
Description |
|
vpn hold-time <seconds> |
Configures a time period in seconds after which the IAPs can switch to primary VPN server. |
| no… | Removes the configuration. |
Usage Guidelines
Use this command to configure a period to hold on switching to the primary server when pre-emption is enabled.
Example
The following example configures a hold-time to switch to the primary host server:
(Instant AP)(config)# hold-time <seconds>
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
|
Version |
Description |
|
Aruba Instant 6.2.1.0-3.3 |
This command is introduced. |
Command Information
|
IAP Platform |
Command Mode |
|
All platforms |
Configuration mode |