Changing USB Port Status

The USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port can be enabled or disabled based on your uplink preferences. If you do not want to use the cellular uplink or 3G Third Generation of Wireless Mobile Telecommunications Technology. See W-CDMA./4G Fourth Generation of Wireless Mobile Telecommunications Technology. See LTE. modem in your current network setup, you can set the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port status to disabled. By default, the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port status is enabled.

The following procedure configures the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port status:

Table 1: Steps to Configure USB Port Status

New WebUI

Old WebUI

To change the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port status:

  1. Navigate to the Configuration > Access Points page.
  2. Select the Instant AP from the Access Points list and click Edit.
  3. Expand Uplink.
  4. Toggle the USB port switch to enable or disable the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  port.
  5. Click Save.
  6. Reboot the Instant AP.

To change the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port status:

  1. In the Access Points tab, select the Instant AP to modify and click edit.
  2. Select the Uplink tab.
  3. In the USB port drop down list box, select either one of the following options:
    1. Disabled—To disable the port status.
    2. Enabled—To re-enable the port status.
  4. Click OK.
  5. Reboot the Instant AP.

The following CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command disables the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port:

(Instant AP)# usb-port-disable

The following CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command enables the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port:

(Instant AP)# no usb-port-disable

The following CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command is used to view the USB Universal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port status:

(Instant AP)# show ap-env

Antenna Type:External

usb-port-disable:1