Aruba Instant 8.7.0.0 Online Help Center Help Center
You are here: Home > Aruba Instant User Guide > Table of Contents > Dual 5 GHz Radio Mode

Dual 5 GHz Radio Mode

This feature allows the Instant AP to configure two radio interfaces, both running 5 GHzGigahertz. channel. The Instant APs have two radios, one operating on 2.4 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation., and the other on 5 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation.. AP-344 and AP-345 access points support upgrade of the 2.4 GHzGigahertz. radio interface to a 5 GHzGigahertz. radio interface. In dual mode, both radio interfaces can operate on 5 GHzGigahertz. bandBand refers to a specified range of frequencies of electromagnetic radiation.. You can configure the dual-5GHz-mode parameter using the WebUI or the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions..

The following procedure describes how to configure a dual 5 GHzGigahertz. radio:

Table 1: Steps to Update Password

Old WebUI

  1. On the Access Points tab, click the Instant AP to modify.
  2. Click the edit link.
  3. Click the Radio tab.
  4. Select Enable from the Dual 5G Mode drop-down list.
  5. Click OK and reboot the Instant AP.

The dual-5 GHzGigahertz.-mode configuration is currently not supported in the new WebUI.

The following command configures the dual-5 GHzGigahertz.-mode:

(Instant AP)# dual-5GHz-mode {<enable><disable>}

The dual-5 GHzGigahertz.-mode command is supported only in AP-344 and AP-345 access points.

/*]]>*/