Link Search Menu Expand Document
calendar_month 07-Mar-24

Microbranch Client Testing

Connect your client to your Microbranch WLAN. You should receive the default role which includes the PBR policy previously configured.

Connect to the remote console of the Microbranch AP and run the following commands and interpret the output:

show ata endpoint
show datapath session table | include <client IP>
show ip nexthop-list

Here is the output of the show ata endpoint command.


Show datapath session | include  <client IP>


show ip nexthop-list


SSE Management Portal

To view the Microbranch AP user sessions inside of the SSE Management portal, login and navigate to Insights>Exploration. Here you can see all recent sessions and you can also filter for certain session criteria and over a set time period.

Here is the view when the view is filtered by Status – Success.


Here is the view when the view is filtered by Status – Block.


Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to Aruba EULA.