Legal Disclaimer: The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
To set a firmware compliance for all gateways in standalone mode, complete the following steps:
- In the WebUI, set the filter to .
The dashboard context for the selected filter is displayed.
- Under , click > tab.
All the gateways with standalone mode is displayed.
- Verify the firmware upgrade status for all gateways.
- Click .
- In the window, enable the Set firmware compliance toggle switch.
- From the drop-down list, select a single group or multiple groups. To select all the groups, click All Groups.
- Select a firmware version from the drop-down list.
-
In the , select one of the following options:
- Select one of the following radio buttons to specify if the compliance must be carried out immediately or at a later date and time:
- —Allows you to set the compliance to be carried out immediately.
- —Allows you to set the compliance to be carried out at the later date and time. Select a specific time zone from the drop-down options to schedule the firmware compliance in a specific time zone.
- From the drop-down, select any one of the following partition options:
- —Select this if you want to install the firmware version in the primary partition.
- — Select this if you want to install the firmware version in the secondary partition.
The option is only available for standard upgrade type.
- Select the check box if you want HPE Aruba Networking Central to automatically reboot.
Automatic reboot check box gets disabled on live upgrade selection.
- Click .
HPE Aruba Networking Central initiates a firmware upgrade operation only for the devices that support the selected firmware version. If any of selected devices do not support the firmware version selected for the upgrade, a list of unsupported devices is displayed.
