Updating Ruleset for IDPS

To use the latest signatures, you must update the rulesets. After enabling traffic inspection, you can update the ruleset version. By default, the ruleset version is automatically updated every 24 hours.

The HPE Aruba Networking gateway (independent or part of a group) that you want to configure must support Gateway IDS/IPS.

To update the ruleset version, complete the following steps:

  1. In the WebUI, select one of two the following options:
    • To configure a Branch Gateway group, complete the following steps:
      1. Set the filter to a group containing at least one Branch Gateway.
        The dashboard context for a group is displayed.
      2. Click Gateways.
      3. Click the Config icon to view the Branch Gateway group configuration dashboard.
    • To configure a Branch Gateway, complete the following steps:
      1. Set the filter to Global or a group containing at least one Branch Gateway.
      2. Under Manage, click Devices > Gateways.
        A list of gateways is displayed in the List view.
      3. Click a gateway under Device Name.
        The dashboard context for the gateway is displayed.
  2. Under Manage, click Security > Gateway IDS/IPS.
  3. Click Config.

    The General tab is displayed. Under the Ruleset section, the Version displays the current ruleset version number running on the device.

  4. To update the ruleset to a different version, select the required version from the Update To drop-down list. Only the three latest versions are available.
    • Information icon—Displayed with ruleset generated on and ruleset activated on timestamps.
    • Alert icon—Displayed if the ruleset version is outdated or if the ruleset version of the device does not match with the ruleset version of the group that it belongs to.

    A confirmation window is displayed.

  5. Click Update.
  6. Alternatively, to automatically update the ruleset at regular intervals, select the Automatically update the ruleset check box.
  7. Select Week or Day from the drop-down list.

    If you have selected week, select the day of the week, and set the time from the drop-down list.

  8. Click Save.