Configuring AOS-10 APs in HPE Aruba Networking Central

This section describes how to configure WLAN Wireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. SSIDs Service Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network., radio profiles, DHCP Dynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  profiles, VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. routes, security and firewall Firewall is a network security system used for preventing unauthorized access to or from a private network. settings, uplink interfaces, logging servers on AOS-10 APs.

For more information on AOS-10 AP configuration, see the following topics:

• Configuring WLAN Properties on HPE Aruba Networking Wireless Operating System 10 APs

• Configuring Access Points Properties on AOS-10 APs

• Configuring Radio Properties on AOS-10 APs

• Configuring Interfaces Properties on AOS-10 APs

• Configuring Security Properties on AOS-10 APs

• Configuring Manual EoGRE Tunnel to Third-Party Devices

• Configuring Services Properties on AOS-10 APs

• Configuring Systems Properties on AOS-10 APs

• Configuring IoT Properties on AOS-10 APs

• Configuring Audit Properties

Related Information

• Migrating APs to AOS-10

• AP-Only Deployments in AOS-10