Guided Setup for AOS-10 Mobility Gateways

You can configure an AOS-10 Mobility Gateway group or an AOS-10 Mobility Gateway using either the Guided Setup, Basic mode, or Advanced mode. This section describes the procedure to configure Mobility Gateways using the Guided Setup.

Before You Begin

Ensure that you have completed the following procedures:

  • Gateways are onboarded to HPE Aruba Networking Central.
  • Gateways are assigned valid subscriptions in HPE Aruba Networking Central.
  • Gateways are assigned to groups.
  • Gateways are assigned the Mobility Gateway group role.

    For more information on setting up an AOS-10 Mobility Gateway, see Getting Started with HPE Aruba Networking Central.

    Ensure the device is not part of a group that is running the guided setup. If the group is being configured using the Guided Setup, the device level setup will not be executed.

The Guided Setup wizard displays the following tabs for device level configuration:

  1. System—Allows you to configure the system IP address.
  2. LAN—Allows you to configure LAN Local Area Network. A LAN is a network of connected devices within a distinct geographic area such as an office or a commercial establishment and share a common communications line or wireless link to a server. ports.
  3. Click Begin to start the guided setup process and complete the steps provided in the following sections:

Many procedures involve adding or configuring parameters in tables. Note that you have options to edit and delete the existing configurations.