Legal Disclaimer: The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
Configuring AOS-10 Mobility Gateway Groups Using the Guided Setup
You can configure an AOS-10 Mobility Gateway group using the Guided Setup, Basic mode, or Advanced mode. This section describes the procedure for configuring Mobility Gateway group using the Guided Setup.
Before You Begin
Before you begin, ensure that you have completed the following procedures:
-
- Gateways are assigned valid subscriptions in HPE Aruba Networking Central.
- Gateways are assigned to groups.
- Gateways are assigned the VPNC group role.
Ensure that the device is not part of a group that is running the guided setup. If the group is being configured using the Guided Setup, the device level setup will not be executed.
The wizard displays the following tabs for device level configuration:
- —Allows you to configure system IP address.
- —Allows you to configure LAN Local Area Network. A LAN is a network of connected devices within a distinct geographic area such as an office or a commercial establishment and share a common communications line or wireless link to a server. ports.
Click to start the guided setup process and complete the steps provided in the following sections:
- Configuring System Parameters for an AOS-10 Mobility Gateway Group
- Configuring LAN Interface for an AOS-10 Mobility Gateway Group
Many procedures involve adding or configuring parameters in tables. Note that you have options to edit 
and delete 
the existing configurations.
