Guided Setup for AOS-10 VPNC Groups

HPE Aruba Networking Gateways deployed at a data center can function as a headend gateway or a VPNC. The VPNCs aggregate traffic from all branch offices. Branch Gateways (BGWs) establish secure Internet Protocol security (IPsec Internet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session.) tunnels to one or more headend gateways over the Internet or other untrusted networks.

You can configure a VPNC group using the Guided Setup, Basic mode, or Advanced mode. This section describes the procedure for configuring VPNCs using the Guided Setup.

Before You Begin

Before you begin, ensure that you have completed the following procedures:

Gateways are onboarded to HPE Aruba Networking Central.
Many procedures involve adding or configuring parameters in tables. Note that you have options to edit and delete the existing configurations.
Gateways are assigned valid subscriptions in HPE Aruba Networking Central.
Gateways are assigned to groups.
Gateways are assigned the VPNC group role.

Ensure that the devices in the group are not running the guided setup at device level. If the device is being configured using the Guided Setup, the group level setup will not be executed.

The Guided Setup wizard displays the following tabs:

System—Allows you to configure system parameters.
LAN—Allows you to configure LAN Local Area Network. A LAN is a network of connected devices within a distinct geographic area such as an office or a commercial establishment and share a common communications line or wireless link to a server. interfaces.
Tunnels & Routing—Allows you to configure the SDWAN overlay and routing profiles.

Click Begin to start the guided setup process and complete the steps provided in the following sections:

Many procedures involve adding or configuring parameters in tables. Note that you have options to edit and delete the existing configurations.