Configuring Static Routing

To configure static routing on Microbranch, complete the following steps:

  1. In the Aruba Central app, set the filter to a Microbranch group that contains at least one AP.

    The dashboard context for a group is displayed.

  2. Under Manage, click Devices > Access Points.
  3. Click the Config icon.

    The Microbranch group configuration page is displayed.

  4. Click Tunnels & Routing > Static Routing.

    The Static Routing page is displayed.

  5. To add a static route entry, click the + icon in the Static Routes table.
  6. Enter the destination IP address in the Destination IP Address field.
  7. Enter the subnet Subnet is the logical division of an IP network. mask in the Destination Mask field.
  8. Select a next hop option from Next Hop drop-down list.
  9. Click Save.
  10. A maximum of 32 route entries can be added.