Access Points > Overview > Routing
The Routing tab in the overview section of an Access Point provides the routing information that is used to monitor, report, and troubleshoot the network infrastructure. The Routes Summary and Routes.tab under > in the Access Point dashboard displays information pertaining to the
To navigate to thetab in the Access Points dashboard, complete the following steps:
- In the Aruba Central app, set the filter to one of the options under , , or containing at least one AP.
Under Manage, click Devices > Access Points.
A list of APs are displayed.
- Click an AP in the Access Points table.
The dashboard context for that AP is displayed.
- Click the tab.
For all devices, set the filter to. The dashboard context for the selected filter is displayed.
The Routes Summary and the Routes tables are displayed.
You can change the time range for thetab by clicking the time range filter and selecting one of the available options.
To exit the Access Point dashboard, click the back arrow on the filter.
The Routes Summary displays the following information:
- —Number of routes currently configured. Also displays the maximum number of allowed routes.
- —Number of connected routes.
- —Number of static routes.
- —Number of overlay connections.
Figure 1 Routes Summary
The Routes table displays the following information:
- —Indicates the time when the routes were last refreshed in hr:mm:ss format.
- subnet Subnet is the logical division of an IP network.. —The route IP address and
- —The IP address of the next hop.
- IKE Internet Key Exchange. IKE is a key management protocol used with IPsec protocol to establish a secure communication channel. IKE provides additional feature, flexibility, and ease of configuration for IPsec standard., Overlay, RAPNG, VPN Virtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two., Application and Default. —Routing protocol. Possible values are Unknown, Connected, Static,
- —Distance for static routes. For a given route destination, there can be multiple next hops. A route metric enables an AP to prefer one route over another or load balance when the metric is the same.
Figure 2 Routes details
- Click the settings icon to select the default columns to be displayed on the Routes table.
- Click the settings icon and click Reset to default to reset the default columns that are displayed on the Routes table.
- Click the filtericon on each column header row to search for an entry by typing the relevant data. On the Protocol column you can select a value from the drop-down list.
- Click the icon on each column header row to arrange the data in ascending or descending order.
Click the refresh icon on the Routes table to refresh the table data.