Link Search Menu Expand Document

DHCP Failover

On the DHCP Failover dialog box, configure the following settings to apply to your DHCP failover servers.

NOTE: The DHCP Failover dialog box is accessed by clicking the Failover Settings link on the DHCP Server Defaults tab.

  1. Select the DHCP Failover check box to enable the DHCP Failover feature.

  2. Select whether you are configuring the failover settings for either the Primary or Secondary server.

  3. Configure the remaining settings in the table below.

    DHCP Failover Fields

    Field Description
    My IP IP address of the LAN interface.
    My Port Port number of the LAN interface.
    Peer IP IP address of the DHCP peer.
    Peer Port Port number of the DCHP peer.
    MLCT Optional. If selected, the default is 60 minutes. This field cannot be zero.
    SPLIT Optional. If selected, determines which peer (primary/secondary) should process the DHCP requests.
    Max Response Delay Optional. If selected, determines how many seconds the DHCP server can pass without receiving a message from its failover peer before it assumes the connection has failed.
    Max Unacked Updates Tells the remote DHCP server how many BNDUPD messages it can send before it receives a BNDACK from the local system.
    Load Balance Max Seconds Optional. Allows you to configure a cutoff after which load balancing is disabled. The cutoff is based on the number of seconds since the client sent its first DHCPDISCOVER or DHCPREQUEST message. It only works with clients that correctly implement the secs field.

Back to top

© Copyright 2022 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to Aruba EULA.