Link Search Menu Expand Document

Inter-Segment Routing and D-NAT Exceptions

Configuration > Networking > Routing > Inter-Segment Routing & D-NAT Exceptions

Use this tab to configure inter-segment routing and Destination NAT (D-NAT) rules when traffic is crossing between segments. Click the edit icon to open the Inter-Segment Routing & D-NAT dialog box. Click +Add Rule and select any rule in the table to modify or define the following:

Field Description
Source Segment Name of the segment that traffic is initiating from.
Matches Destination IP IP address that matches the destination segment IP address, before D-NAT. The IP address is included in the defined policy match criteria.
Send to Segment Name of the segment the packets are translated to from the matched destination IP address. This is included in the set criteria.
Translated Destination IP IP address of the D-NAT IP address when the segment is translated.

NOTE: If D-NAT is not needed, this field is empty.
Enabled Indicates whether inter-segment D-NAT is enabled or disabled within your segment.
Comment Any additional information.

NOTE: This only pushes the inter-segment D-NAT exceptions to one appliance, selected in the Orchestrator appliance tree.

Back to top

© Copyright 2023 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to Aruba EULA.