Link Search Menu Expand Document

VRRP Template

Use this template to distribute common parameters for appliances deployed with Virtual Router Redundancy Protocol (VRRP).

img

In an out-of-path deployment, one method for redirecting traffic to the EdgeConnect appliance is to configure VRRP on a common virtual interface. Possible scenarios are:

  • When no spare router port is available, a single appliance uses VRRP to peer with a router (or Layer 3 switch). This is appropriate for an out-of-path deployment in which no redundancy is needed.

  • A pair of active, redundant appliances use VRRP to share a common, virtual IP address at their site. This deployment assigns one appliance a higher priority than the other, thereby making it the Master appliance, and the other the Backup.

Field Description
Admin Options are up (enable) and down (disable).
Advertisement Timer Default is 1 second.
Authentication String Clear text password for authenticating group members.
Preemption Leave this selected/enabled so that after a failure, the appliance with the highest priority comes back online and again assumes primary responsibility.
Priority The greater the number, the higher the priority. The appliance with the higher priority is the VRRP Master.

Back to top

© Copyright 2022 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to Aruba EULA.