Link Search Menu Expand Document

Tunnel Exception

Configuration > Networking > Tunnels > Tunnel Exception

Orchestrator includes a tunnel exception feature that enables you to specify tunnel transactions between overlays. There are two ways you can enable this feature in Orchestrator.

You can configure tunnel exceptions through the Tunnel Exception tab.

  1. Select the two appliances that you do not want connected via a tunnel.

  2. Enter the Interface Labels.

img

The interface label can be any type of connection, such as any, MPLS, Internet, or LTE. Specifying the label excludes appliances within a given network to communicate with that particular appliance.

NOTE: Use the description field to add a comment if you want to indicate why you are adding an exception.


Back to top

© Copyright 2022 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to Aruba EULA.