Link Search Menu Expand Document

Maintenance Mode

Orchestrator > Orchestrator Server > Tools > Maintenance Mode

You can put one or more appliances in maintenance mode by selecting the specific appliance in the tree. When approved, the appliances are added to the maintenance list. You can also put an appliance in maintenance mode by searching for “Maintenance Mode” in the search bar or by right-clicking any appliance and selecting Maintenance Mode. Complete the following steps to add an appliance to maintenance mode.

  1. Navigate to Orchestrator > Orchestrator Server > Tools > Maintenance Mode.
  2. Click Add. The Configure Maintenance Mode window opens.
  3. If you want to pause orchestration, select Pause Orchestration.
  4. If you want to suppress alarms associated with this appliance while in maintenance mode, select Suppress Alarms.
  5. Click OK.
  6. Click Save.

NOTE: If you pause orchestration and/or suppress all alarms, the appliance goes into maintenance mode.

Field Description
Host Name Host name of the appliance you are adding to maintenance mode.
Alarms Whether you chose to suppress or alarms while the appliance is in maintenance mode.
Orchestration If paused, all orchestration is paused on the selected appliance, except IPsec UDP Tunnel Key material.
IP IP address of the appliance in maintenance mode.
Version Current version of the appliance.

Back to top

© Copyright 2022 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to Aruba EULA.