Link Search Menu Expand Document

Restore a Backup to an Appliance

Administration> Software > Backup & Restore > Restore

You can restore an appliance configuration backup from Orchestrator to any other EdgeConnect appliances in your network.

CAUTION: Be careful to consider any potential conflicts when the backup specifies a static mgmt0 IP address, as opposed to specifying DHCP.

If you restore from a backup that is older than the latest backup, you could experience the following:

  • A loss of configuration changes that were made during the period between the older backup and the latest backup.

  • A loss of appliances that were added during the period between the older backup and the latest backup.

  • IPSec UDP tunnels may experience a brief outage as the new seed is applied.


Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America