Link Search Menu Expand Document

Inter-Segment SNAT Exceptions

Configuration > Networking > Routing > Inter-Segment SNAT Exceptions

Use this tab to enable source network address translation to your segments. Select an appliance or group of appliances in the Orchestrator appliance tree to apply your Source NAT (SNAT) exceptions.

NOTE: The default setting for S-NAT is enabled for inter-segment traffic.

Field Description
Appliance Name of the segment that the SNAT exception is being applied to.
Source Name of the segment that the SNAT is starting from.
Destination Name of the segment that the SNAT is translated to and going to.
SNAT Indicates whether SNAT is enabled or disabled for the specified segment.
Comment Any additional information.

Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America