Link Search Menu Expand Document

Management Routes Tab

Configuration > Networking > Routing > Management Routes

Use this tab to configure next-hops for management interfaces.


  • Management routes specify the default gateways and local IP subnets for the management interfaces.

  • In a Dual-Homed Router Mode configuration, you might need to add a static management route for flow redirection between appliances paired for redundancy at the same site.

  • The management routes table shows the configured static routes and any dynamically created routes. If you use DHCP, the appliance automatically creates appropriate dynamic routes. A user cannot delete or add dynamic routes.

  • If the Source IP is listed as, packets sent using this route use the Interface’s IP address as the Source IP address. If the Source IP lists a specific IP address, that IP address is used instead.

Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America