Link Search Menu Expand Document

Virtual Tunnel Interfaces (VTI)

Configuration > Networking > Virtual Tunnel Interfaces (VTI)

A Virtual Tunnel Interface (VTI) is a tunneling protocol that does not require a static mapping of IPSec sessions to a physical interface. The tunnel endpoint is associated with a tunnel interface that enables a constant secure and stable connection throughout your network.

Click the Edit icon to get started configuring your VTIs.

VTI Dialog Box

Complete the following steps to configure a VTI with an associated tunnel in Orchestrator.

  1. Click Add.

    The Add VTI Interface dialog box opens.

  2. Complete the following fields with the appropriate information.

    Field Description
    Segment Name of the segment, if enabled.
    Interface ID of the VTI.

    NOTE: IDs 20000 through 30000 are reserved for Orchestrator.
    Admin Select whether the interface is up or down.
    Status Status of the VTI tunnel.
    IP/Mask IP address and subnet mask of the VTI.
    Passthrough Tunnel Name of the passthrough tunnel associated with the VTI.
    Interface Type Interface type (lan or wan).
    Label If you want to apply a label to the VTI, select one from the list of those available.
    Zone Select the firewall zone to which the VTI should apply from the drop-down list.
  3. Click Add.

Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP.

To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

This product includes code licensed under certain open source licenses which require source compliance. The corresponding source for these components is available upon request. This offer is valid to anyone in receipt of this information and shall expire three years following the date of the final distribution of this product version by Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at but, if not, send a written request for specific software version and product for which you want the open source code. Along with the request, please send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America