Link Search Menu Expand Document

Discovered Appliances

Configuration > Overlays & Security > Discovery > Discovered Appliances

This tab lists each appliance that Orchestrator discovers.

img

  • To enable Orchestrator to manage an appliance after you verify its credentials, click Approve.

  • If the appliance does not belong in your network, click Deny. If you want to include it later, click Show Denied Devices, locate it in the table, and click Discover.

    img

  • As a security measure to prevent unauthorized management of your network, any Orchestrator with your Account Name and Account Key must be approved by the originally deployed Orchestrator.

  • If you enabled Air-Gap mode, the Air-Gap appliances awaiting discovery button may appear. For more information on discovering appliances and assigning serial numbers to appliances in Air-Gap mode, see HPE Aruba Networking Orchestrator Air-Gap User Guide.


Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America