Link Search Menu Expand Document

CLI Template

Use this template to enter any sequence of Command Line Interface (CLI) commands.

Enter each CLI command on a new line.

img

Orchestrator sends all commands entered in the CLI template with a single batch command to EdgeConnect gateway. This batch command is sent through a single REST call that has a 60 second timeout. Placing enough commands to cause the REST call to timeout can result in unpredictable behavior.

CLI commands can be entered directly in the CLI to verify the time required to execute them. We recommend that the command set entered in the CLI Template page requires a maximum of 30 seconds when entered manually in the CLI.


Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP.

To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

This product includes code licensed under certain open source licenses which require source compliance. The corresponding source for these components is available upon request. This offer is valid to anyone in receipt of this information and shall expire three years following the date of the final distribution of this product version by Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific software version and product for which you want the open source code. Along with the request, please send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America