Link Search Menu Expand Document

Date/Time Setting

Configure an appliance’s date and time manually, or complete the following steps to configure it to use an NTP (Network Time Protocol) server.

  1. From the Time Zone list, select the appliance’s geographical location.

  2. If you select Manual, the appliance is matched to your web client system when the template is applied. This eliminates the delay between configuring time manually and applying the template.

  3. To use an NTP server, select NTP Time Synchronization and complete the following steps.

    1. Click Add.

    2. Enter the IP address or host name of the server.

    3. Select the version of NTP protocol to use.

NOTE: The server is selected in the order listed when you list more than one NTP server.

Data Collection

  • Orchestrator collects and puts all statistics in its own database in Coordinated Universal Time (UTC).

  • When a user views statistics, the appliance (or Orchestrator server) returning the statistics always presents the information relative to the browser time zone.

Back to top

© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Aruba Networks and the Aruba logo are registered trademarks of Aruba Networks, Inc. Third-party trademarks mentioned are the property of their respective owners. To view the end-user software agreement, go to HPE Aruba Networking EULA.

Open Source Code:

Hewlett Packard Enterprise Company
Attn: General Counsel
WW Corporate Headquarters
1701 E Mossy Oaks Rd Spring, TX 77389
United States of America